zprobe.enable false Set to true to enable the Z-probe module. This is used to scan surfaces, and to calibrate parameters and compensate for non-planar surfaces.
zprobe.probe_pin 1.28!^ Pin the probe is connected to.
zprobe.slow_feedrate 5 Speed in millimetres/second at which the probe seeks a surface.
zprobe.fast_feedrate 100 Speed in millimetres/second at which the probe does fast moves.
zprobe.return_feedrate 50 Speed in millimetres/second at which the probe does the return after a probe.
zprobe.debounce_ms 1 Debounce the probe pin over this number of millisceconds. Set to 1 or 2 if your probe is too noisy and gives false readings.
zprobe.probe_height 5 Distance above the bed at which the probing is started, once the bed's height is known.

This site is a WIki, which means you are very welcome to help us improve it. Help on how to do that can be found at the Editing the Wiki page . You can edit any page by clicking the "Edit" button bellow :