leveling-strategy.three-point-leveling.enable true Set to true to enable the leveling strategy that probes three points to define a plane and then keeps the Z parallel to that plane. This is useful if your Z plate/bed is not perfectly aligned with your XY gantry
leveling-strategy.three-point-leveling.point1 100.0,0.0 The first probe point (X, Y)
leveling-strategy.three-point-leveling.point2 200.0,200.0 The second probe point (X, Y)
leveling-strategy.three-point-leveling.point3 0.0,200.0 The third probe point (X, Y)
leveling-strategy.three-point-leveling.home_first true Home the X and Y axes before probing
leveling-strategy.three-point-leveling.tolerance 0.03 The probe tolerance in millimetres, anything less that this will be ignored, default is 0.03mm
leveling-strategy.three-point-leveling.probe_offsets 0,0,0 The probe offset from nozzle, must be X,Y,Z (Z should always be 0), default is no offset. This is used if your nozzle is not exactly at the same position as where your tool would be.
leveling-strategy.three-point-leveling.save_plane false Set to true to allow the bed plane to be saved with M500, default is false

This site is a WIki, which means you are very welcome to help us improve it. Help on how to do that can be found at the Editing the Wiki page . You can edit any page by clicking the "Edit" button bellow :