G28.1 G-code

G28.1 means "store the origin position that the machine goes to when the {G28} command is issued".

This position is stored into memory, but is lost if the machine is reset. You can make that position permanent by sending the M500 G-code.


The command is used as such :

G28.1 X10 Y10

Which means : record the origin position as being at the X position 10 and Y position 10


Parameter Usage Example
X Record origin position for X axis G28.1 X10
Y Record origin position for Y axis G28.1 Y10
Z Record origin position for Z axis G28.1 Z10

Friend G-codes

This G-code sets the origin position that the G28 G-code goes to.

And you can use the M500 G-code to save this position into the config-override permanently.

Further reading

These resources are used as references for Gcode :

This site is a WIki, which means you are very welcome to help us improve it. Help on how to do that can be found at the Editing the Wiki page . You can edit any page by clicking the "Edit" button bellow :